Dr. Wisam Abu Jadayil


 

Title:  Associate Professor – Industrial and Mechanical Engineering
School: School of Engineering
Department: Mechanical and Industrial Engineering Department
Office:  Bldg. G-308
Phone: Ext. 1157
Email: wisam.abujadayil@aurak.ac.ae

Dr. Wisam Abu Jadayil is an associate professor in industrial and mechanical engineering. Dr. Abu Jadayil has a double major in the industrial engineering (Engineering Management) and mechanical engineering (CAD/CAM). He earned his PhD’s degrees from Iowa State University/ United States of America in 2005. He published more than thirty research conference and journal articles. Dr. Abu Jadayil has worked as a consultant for many companies in USA, Jordan and gulf region in the areas of industrial management, manufacturing processes and production planning and control. Dr. Abu Jadayil has conducted many training courses and seminars in Jordan, Turkey, Libya and the Gulf region in the areas of project management, supply chain and inventory management, reliability, safety and risk management, instrumentation and control, production planning and control and CAD/CAM. In addition, Dr. Abu Jadayil is a life time member in the Phi Kappa Phi and the Tau Beta Pi organizations.

Journal Papers:

  • Abu Jadayil, W., “Surface and Subsurface Defects Investigation of Ni-Ti Samples Processed by Different Fabrication Methods,” Research Journal of Applied Sciences, Engineering and Technology, Vol. 11, No. 11, pp. 1190-1195, 2015.
  • Abu Jadayil, W. and Alnaber, M., “Experimental Investigation of Tensile Properties of Ni-Ti Samples Prepared by Different Techniques,” International Journal of Applied Engineering Research, Vol. 10, No. 6, pp. 15651-15659, 2015.
  • Abu Jadayil, W. and Alnaber, M., “Assessment of Fatigue Life of Ni-Ti Samples Prepared by Different Techniques,” Applied Mechanics and Materials, Vol. 477-478, pp. 1264-1268, 2014.
  • Abu Jadayil, W, Mohsen, M. and Al-Bashir, A., “Statistical Model Representing Workers Turnover Problem in Third Developing Countries: Jordanian Industrial Sector,” International Journal of Human Resource Studies, Vol. 3, No. 4, pp. 102-110, 2013.
  • Obeidat, S., Abu Jadayil, W., and Mandahawi, N., “Intellegent Sampling for Inspecting Milled Flat Plates,” International Review of Mechanical Engineering, Vol. 7, No. 4, pp. 767-774, 2013.
  • Obeidat, S., Fouad, R., Mandahawi, N., and Abu Jadayil, W, “Intelligent Sampling for Inspecting Cylindrical Surfaces,” Advances in Information Sciences and Service Sciences, Vol. 5, No. 12, pp. 46-55, 2013.
  • Obeidat, S., Agbaraji, C., Abu Jadayil, W, and Mandahawi, N., “Heterogeneous Femur Model Reconstruction for Improved FEA Analysis,” International Review of Mechanical Engineering (I.RE.M.E.), Vol. 6, n. 3, 2012.
  • Abu Jadayil, W. and Mohsen, M., “Experimental Investigation of Self Actuating Traction Drives with Solid and Hollow Rollers,” International Review of Mechanical Engineering, Vol. 5, No. 4, pp. 637-645, 2011. 
  • Abu Jadayil, W., “Experimental Investigation of Solidification Time Effects on Surface and Subsurface Aluminum Casting Defects,” International Review of Mechanical Engineering, Vol. 5, No. 4, pp. 569-576, 2011.
  • Abu Jadayil, W., “Studying the effects of varying the pouring rate on the casting defects using non-destructive testing techniques,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 5, No. 6, pp. 521-526, 2011.
  • Abu Jadayil, W., “Main factors causing workers turnover in Jordan industrial sector,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 5, No. 2, 161-166, 2011.
  • Abu Jadayil, W., “Revision of the recent heterogeneous object modeling techniques,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 4, No. 6, 2010, 779-788.
  • Abu Jadayil, W. and Mohsen, M., “Design and manufacturing of self actuating traction drives with solid and hollow rollers,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 4, No. 4, 2010, 467-476. 
  • Khraisat, W. and Abu Jadayil, W., “Strengthening Aluminum Scrap by Alloying with Iron,” Jordan Journal of Mechanical and Industrial Engineering, Vol. 4, No. 3, 2010, 372-377.
  • Abu Jadayil, W. and Jaber, N., “Numerical prediction of optimum hollowness and material of hollow rollers under combined loading,” Journal of Materials and Design, Vol. 31, No. 3, 2010, 1490-1496.
  • Abu Jadayil, W. and Khraisat, W. “Predicting the optimum hollowness of normally loaded cylindrical rollers using finite element analysis,” Journal of Materials Science and Technology, Vol. 26, No. 2, 2010, 176-183.
  • Khraisat, W., Borgstrom, H., Nyborg, L. and Abu Jadayil, W. “Optimising grey iron powder compacts,” Journal of Powder Metallurgy, Vol. 52, No. 4, 2009, 291-297.
  • Abu Jadayil, W., “Relative fatigue life estimation of cylindrical hollow rollers in general pure rolling contact,” Journal of Tribotest 2008; 14: 27-42, Wiley InterScience.
  • Abu Jadayil, W. and Flugrad, D. “Fatigue life investigation of solid and hollow rollers under pure normal loading,” Journal of Tribotest 2007; 13: 165-181, Wiley InterScience.
  • Abu Jadayil, “Fatigue life investigation of solid and hollow rollers in pure rolling contact,” PhD dissertation, ProQuest UMI Dissertation Publishing, ISU Press, Ames, Iowa, 2005.

Conferences:

  • Abu Jadayil, W. and Alnaber, M., “Assessment of Tensile Properties of Ni-Ti Samples Prepared by Different Techniques,” Proceedings of the 12th Biennial Conference on Engineering Systems Design and Analysis, ESDA 14, June 25-27, 2014, Copenhagen, Denmark.
  • Abu Jadayil, W. and Alnaber, M., “Assessment of Fatigue Life of Ni-Ti Samples Prepared by Different Techniques,” 2nd International Conference on Applied Mechanics and Materials, November 23-24, 2013, Zhuhai, China.
  • Obeidat, S., Bashir A. and Abu Jadayil, W., “The Importance of Class Attendance and Cumulative GPA for Academic Success in Industrial Engineering Classes,” World Academy of Science, Engineering and Technology Proceedings, Vol. 6, No. 1: 1025-1028, Jan 25, 2012, Dubai, UAE.
  • Abu Jadayil, W., Flugrad, D. and Qamhiyah, A., “Fatigue life prediction of optimum hollowness of hollow cylindrical rollers in pure rolling contact,” Proceedings of the 8th Biennial ASME Conference on Engineering Systems Design and Analysis – ESDA 2006, The ASME Conference on Engineering Systems Design and Analysis, Turin, Italy, July 4-7, 2006.
  • Abu Jadayil, W. and Flugrad, D. “Optimization of fatigue life of hollow rollers under pure normal loading,” Proceedings of the 8th Biennial ASME Conference on Engineering Systems Design and Analysis – ESDA 2006, The ASME Conference on Engineering Systems Design and Analysis, Turin, Italy, July 4-7, 2006.
  • Abu Jadayil, W., Flugrad, D. and Qamhiyah, A. “Fatigue life investigation of solid and hollow cylindrical rollers,” International Conference on CAE and computational Technologies for Industry, Convento di San Domenico – Lecce – Italy, October 5-8, 2005.
  • Abu Jadayil, W., Flugrad, D. and Qamhiyah, A. “Fatigue life investigation of solid and hollow cylinders in pure rolling contact,” Proceedings of NANO2005 Integrated Nanosystems: Design, Synthesis and Applications September 15-16, 2005, University of California, Berkeley, California USA.
  • Abu Jadayil, W., Flugrad, D. and Qamhiyah, A. “Fatigue life investigation of solid and hollow rollers in pure rolling contact,” Extended Abstract, World Tribology Congress III, Washington DC, USA, September 12-16, 2005.
  • Abu Jadayil, W., Flugrad, D. and Qamhiyah, A. “Fatigue life investigation of solid and hollow cylinders under Normal loading,” Extended Abstract, 8th US National Congress on Computational Mechanics, Austin, TX, July 25-27, 2005.

Books:

  • “Maintenance Strategies for NC and CNC Machines”, written in Arabic Language. Used as text book in The Technical and Vocational Training Corporation in Saudi Arabia since March 2011.
  • “CNC Grinding Machines”, written in English Language and translated to Arabic Language. Used as text book in The Technical and Vocational Training Corporation in Saudi Arabia since January 2010.

Current Research Work

  • Experimental investigation of Nickel-Titanium alloy used in medical applications, using destructive and nondestructive testing techniques.
  • Implementing SERVIQUAL principles on service sector.
  • Implementing Lean Production principles on service and industrial sectors.
Virginia-State-University-001
University-of-Texas-at-Arlington-001
University-of-the-West-of-England-001
University-of-Illinois-Urbana-Champaign-001
University-of-Limerick-001
University-of-Social-Sciences-and-Humanities
Universiti-Teknologi-Mara
University-of-California-Irvine
The-Lincoln-University
Uni-of-Nebraska-at-Kearney
Universitat-de-Barcelona
Sudan-University-of-Science-and-Technology
SUNY---Albany
Pazmany-Peter-Catholic-University
RAKMHSU
St.-Francis-Xavier-University
La-Rochelle-Business-School
Institut-Catholique-de-Paris
Karlshochschule-International-University
Konkuk-University
Hong-Kong-University-of-Science-and-Technology
George-Mason-University
California-State-University---San-Bernardino
Brock-University
Bowling-Green-State-University
Appalachian-State-University

Our Campus

American University of
Ras Al Khaimah Road,
Ras al Khaimah, UAE
PO Box: 10021

Contact Us

Tel. :  + 971 7 2210 900
Fax :  
+ 971 7 2210 300
Mail:  info@aurak.ac.ae

Follow AURAK on:

Facebook   Tweeter   Youtube   Google Scholar
Instagram   Linked in   Location